How do I switch between Automatic and Manual mode when using the Hybrid model?

Switching the Hybrid model from the automatic mode to manual mode or vice versa has been made simple and convenient for the operator.

Setting Up for Automatic Mode

See the section above titled “How do I set-up and operate my Automatic model 100Xs/100Xp”.

Setting Up for Manual Mode

• Disconnect the PLC Interface Port and Auto Port prior to turning the unit on
• Use the “SUPPLY” hose to connect ports “SUPPLY 1” and “SUPPLY 2”
• Use the “RETURN” hose to connect ports “RETURN 1” and “RETURN 2”
• Use the transparent green hose to connect ports “PH1” and “PH2”
• Use the transparent red hose to connect ports “PL1” and “PL2”